MIL-DTL-2/44D
SPECIAL REQUIREMENTS:
1.
Diaphragms in style IV valves shall be made of metal.
2.
Mark the valve body: LPG.
3.
Markings shall be in accordance with CGA S-1.1.
4.
Start to discharge pressure shall be 375 psig.
5.
Flow rating pressure shall be 480 psig.
6.
Flow capacity shall be not less than 720 cfm.
OPTIONAL REQUIREMENTS:
1. Outlet cap or plug (required) (not required).
INTENDED USE: The valves covered by this specification sheet are intended for use with
cylinders for butane, propane, butane and propane mixtures, MAPP, and propylene with nominal
capacities of up to 200 pounds LPG (480 pounds H20 capacity maximum).
NOTES:
1. Type designation will include any style valve from table I.
2. Special requirements will be mandatory for all valve procurements.
3. Optional requirements will be specified for each valve procurement.
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to
identify changes with respect to the previous issue due to the extent of the changes.
Custodians:
Preparing Activity:
DLA - GS3
Army - AT
Navy - SH
(Project 8120-1047-44)
Air Force - 68
Review Activities:
Army - AV
Navy - AS, MC, YD
2