MIL-DTL-2-7 Valve, Cylinder, Gas: Anhydrous Ammonia \(Dished-Head Cylinder\), Outlet 240, Inlet 0.75 Inch \(Pressures Through 500 Psig \(3450 Kpa\) At 70 Deg. F \(21.1 Deg. C\)\) \(S/S By A-A-59860\)

Pages 1 - 2

MIL-DTL-2/7D

4. The valve seat shall be tin.

5. Mark the valve body: AMMONIA S.

OPTIONAL REQUIREMENTS:

Outlet cap or plug (required) (not required).

Wrench or key (required) (not required).

Dip tube assembled to valve (required) (not required).

Cylinder diameter if other than 15.00 inches (inches).

INTENDED USE: The valves covered by this specification sheet are intended for use with

anhydrous ammonia cylinders having a 0.75-inch outlet connection and a dished head.

NOTES:

1. Special requirements will be mandatory for all valve procurements.

2. Optional requirements will be specified for each valve procurement.

CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to

identify changes with respect to the previous issue due to the extent of the changes.

Custodians:

Preparing Activity:

DLA - GS3

Army - AT

Navy - SH

(Project 8120-1047-07)

Air Force - 68

Review Activities:

Army - AV

Navy - AS, MC, YD