MIL-STD-1411 Inspection And Maintenance Of Compressed Gas CylindersThis standard defines the requirements and procedures for the inspection, maintenance, and charging of government-owned cylinders by gas suppliers. This standard is intended to assure that the cylinders are serviced to meet safety standards and to assure that the quality of the gas supplied is not degraded by a government container. This standard is also applicable to cylinders that require reconditioning, repair, and rebuilding to assure a level of renewal that meets the needs of the government and industry in gas handling. This standard is also to be a guide when cylinders are sorted, graded, and classified for storage, salvage, or disposal in depot facilities.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53

MIL-STD-1411B

CODE OF FEDERAL REGULATIONS  (CFR)

49 CFR 173             -  Shippers - General Requirements for Shipments and

Packagings

49 CFR 178             -  Specifications for Packagings

(Copies of these documents are available online at https://www.gpoaccess.gov/cfr/ or from the

Superintendent of Documents, P.O. Box 371954, Pittsburgh, PA  15250-7954.)

2.3  Non-government publications.  The following documents form a part of this document to the extent specified herein.  Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.

ASTM INTERNATIONAL

ASTM D2029          -  Standard Test Methods for Water Vapor Content of

Electrical Insulating Gases by Measurement of Dew Point

ASTM D2200          -  Standard Practice for Use of Pictorial Surface Preparation

Standards and Guides for Painting Steel Surfaces

(Copies of these documents are available from https://www.astm.org/ or from ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA  19428-2959.)

COMPRESSED GAS ASSOCIATION, INC. (CGA)

CGA C-1                  -  Methods for Hydrostatic Testing of Compressed Gas Cylinders

CGA C-5                  -  Wall Stress Requalification Criteria for High Pressure

Seamless Steel Cylinders

CGA C-6                  -  Standards for Visual Inspection of Steel Compressed Gas

Cylinders

CGA C-20                - Methods for Ultrasonic Examination of Metallic, DOT and TC

3-Series Gas Cylinders and Tubes

CGA G-4.1              -  Cleaning Equipment for Oxygen Service

CGA S-1.1               -  Pressure Relief Device Standards - Part 1 - Cylinders for

Compressed Gases

CGA TB-17             -  Test Methods for Evaluating Paints and Coatings on Refillable

Steel Compressed Gas Cylinders

CGA V-1                 -  Standard for Compressed Gas Cylinder Valve Outlet and Inlet

Connections

(Copies of these documents are available from https://www.cganet.com/ or from the Compressed

Gas Association, Inc., 4221 Walney Road, 5th Floor, Chantilly, VA  20151-2923.)

3