INCH-POUND
MIL-DTL-11732F
15 September 2010
SUPERSEDING
MIL-DTL-11732E
25 January 1999
DETAIL SPECIFICATION
CYLINDER, COMPRESSED GAS: CHLORINE;
DOT 3A480 OR DOT 3AA480,
GENERAL SPECIFICATION FOR
Reactivated after 15 September 2010 and may be used for
new and existing designs and acquisitions.
This specification is approved for use by all Departments and Agencies of the
Department of Defense.
1. SCOPE
1.1 Scope. This specification covers four types of steel cylinders, with valve and cap,
intended for chlorine service.
1.2 Classification. The cylinders covered by this specification will be of the following
types, as specified (see 6.2).
Type I
-
20 pounds
Type II
-
30 pounds
Type III
-
100 pounds
Type IV
-
150 pounds
Comments, suggestions, or questions on this document should be addressed to Defense
Logistics Agency Aviation VEB, 8000 Jefferson Davis Highway, Richmond, VA 23297-5616,
or e-mailed to STDZNMGT@dla.mil. Since contact information can change, you may want to
verify the currency of this address information using the ASSIST database at
AMSC N/A
FSC 8120
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business