MIL-DTL-17376F
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all specified
requirements of the documents cited in sections 3 and 4 of this specification, whether or not they
are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards,
and handbooks form a part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are those cited in the solicitation or contract (see 6.2).
FEDERAL STANDARDS
FED-STD-H28
- Screw-Thread Standards for Federal Services.
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-DTL-17376/1
- Caps and Flanges, Compressed-Gas Cylinder: Caps.
MIL-DTL-17376/2
- Caps and Flanges, Compressed-Gas Cylinder: Flanges,
Low Pressure.
MIL-DTL-17376/3
- Caps and Flanges, Compressed-Gas Cylinder: Flange,
High Pressure.
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-101
- Color Code for Pipelines & for Compressed Gas
Cylinders.
MIL-STD-1916
- DoD Preferred Methods for Acceptance of Product.
(Copies of these documents are available at https://assist.daps.dla.mil or from the
Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA
19111-5094.)
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business