MIL-DTL-22606D(SH)
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this
specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those cited in the solicitation or contract.
FEDERAL SPECIFICATIONS
O-S-642
-
Sodium Phosphate, Tribasic, Anhydrous; Dodecahydrate; and
Monohydrate; Technical
QQ-N-281
-
Nickel-Copper Alloy Bar, Rod, Plate, Sheet, Strip, Wire, Forgings, and
Structural and Special Shaped Sections
FEDERAL STANDARDS
FED-STD-H28
-
Screw-Thread Standards for Federal Services
COMMERCIAL ITEM DESCRIPTIONS
A-A-59155
-
Nitrogen, High Purity, Special Purpose
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-E-22200/2
-
Electrodes, Welding, Covered (Austenitic Chromium-Nickel Steel)
MIL-DTL-24441/20
-
Paint, Epoxy-Polyamide, Green Primer, Formula 150, Type III
MIL-DTL-24441/29
-
Paint, Epoxy-Polyamide, Green Primer, Formula 150, Type IV
MIL-PRF-25567
-
Leak Detection Compound, Oxygen Systems
MIL-PRF-27617
-
Grease, Aircraft and Instrument, Fuel and Oxidizer Resistant
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-1330
-
Precision Cleaning and Testing of Shipboard Oxygen, Helium, Helium-
Oxygen, Nitrogen, and Hydrogen Systems
MIL-STD-1622
-
Cleaning of Shipboard Compressed Air Systems
MIL-STD-2035
-
Nondestructive Testing Acceptance Criteria
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or from the
Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
2.2.2 Other Government documents, drawings, and publications. The following other Government documents,
drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified,
the issues of these documents are those cited in the solicitation or contract.
NAVAL SEA SYSTEMS COMMAND (NAVSEA) PUBLICATIONS
S9074-AR-GIB-010/278
-
Requirements for Fabrication Welding and Inspection, and Casting
Inspection and Repair for Machinery, Piping, and Pressure Vessels
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business