MIL-DTL-22606D(SH)
SAE INTERNATIONAL
SAE-AMS7259
-
Rings, Sealing, Fluorocarbon (Fkm) Rubber High-Temperature-Fluid
Resistant Low Compression Set 85 to 95
(Copies of this document are available from SAE International, 400 Commonwealth Drive, Warrendale, PA
15096-0001 or online at www.sae.org.)
SOCIETY FOR PROTECTIVE COATINGS
SSPC-SP 10/NACE No. 2
-
Near-White Blast Cleaning
(Copies of this document are available from SSPC Publication Sales, 40 24th Street, 6th Floor, Pittsburgh, PA
15222-4656 or online at www.sspc.org.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between
the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this
document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Material.
3.1.1 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or environmentally
preferable materials should be used to the maximum extent possible, provided that the material meets or exceeds the
operational and maintenance requirements, and promotes economically advantageous life cycle costs.
3.1.2 Flasks. Material for flasks shall be forged or hot rolled steel in accordance with the chemistry specified in
ASTM A336/A336M for Grade F22 or in ASTM A335/A335M for Grade P22. Material shall be heat-treated as
specified in 3.3.3 to achieve the mechanical properties in table II. Material chemistry shall be verified by testing as
3.1.3 Skirts and bearing blocks. Material for support skirts shall be HY-80/100 steel plate or forgings in
accordance with the chemistry specified in T9074-BD-GIB-010/300. The material for bearing blocks shall be steel
in accordance with the chemistry specified in ASTM A572/A572M. Material shall be heat-treated as specified in
3.3.3 to achieve the mechanical properties specified in table II. Material chemistry shall be verified by testing as
specified in 4.3.1 and mechanical properties verified by testing as specified in 4.3.2.1 and 4.3.2.2.
7
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business